dmesg - athlon x2 250 DDR2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009fee0000 (usable)
BIOS-e820: 000000009fee0000 - 000000009fee3000 (ACPI NVS)
BIOS-e820: 000000009fee3000 - 000000009fef0000 (ACPI data)
BIOS-e820: 000000009fef0000 - 000000009ff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: System manufacturer System Product Name/M2N-E, BIOS ASUS M2N-E ACPI BIOS Revision 5001 03/23/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x9fee0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 00009FF00000 mask FFFFFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f59b0] f59b0
initial memory mapped : 0 - 01a00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000379fe000
0000000000 - 0000200000 page 4k
0000200000 - 0037800000 page 2M
0037800000 - 00379fe000 page 4k
kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
RAMDISK: 36a14000 - 37502000
ACPI: RSDP 000f7750 00024 (v02 Nvidia)
ACPI: XSDT 9fee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 9feeac80 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 9fee3280 0798A (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 9fee0000 00040
ACPI: SSDT 9feeaec0 00458 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 9feeb380 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 9feeb400 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 9feeadc0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
1668MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000379fe
HighMem 0x000379fe -> 0x0009fee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0009fee0
On node 0 totalpages: 654959
free_area_init_node: node 0, pgdat c140d640, node_mem_map f5614200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 221994 pages, LIFO batch:31
HighMem zone: 3338 pages used for memmap
HighMem zone: 423896 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 9ff00000 (gap: 9ff00000:50100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f79b9000 s33280 r0 d24064 u57344
pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 649841
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:0009fee0)
Memory: 2581884k/2620288k available (2836k kernel code, 37952k reserved, 1343k data, 412k init, 1708936k highmem)
virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc1415000 - 0xc147c000 ( 412 kB)
.data : 0xc12c50ec - 0xc1414f00 (1343 kB)
.text : 0xc1000000 - 0xc12c50ec (2836 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f5006000 soft=f5008000
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3013.832 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.66 BogoMIPS (lpj=12055328)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II X2 250 Processor stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f5094000 soft=f5096000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (12055.52 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 9fee0000 (12288 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
node 0 link 0: io port [d000, ffff]
TOM: 00000000a0000000 aka 2560M
Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [a0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f02fffff] ==> [f0100000, f02fffff]
bus: [00, 02] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xa0000000-0xefffffff]
bus: 00 index 3 [mem 0xf0300000-0xfcffffffff]
bus: 00 index 4 [mem 0xf0100000-0xf02fffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x9ff00000-0xfebfffff]
pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
pci 0000:00:01.0: [10de:0360] type 0 class 0x000601
pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0xff00-0xff3f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
pci 0000:00:04.0: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:05.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:05.0: reg 20: [io 0xf700-0xf70f]
pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:05.1: reg 18: [io 0x0960-0x0967]
pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:05.1: reg 20: [io 0xf200-0xf20f]
pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
pci 0000:00:05.2: reg 10: [io 0xf100-0xf107]
pci 0000:00:05.2: reg 14: [io 0xf000-0xf003]
pci 0000:00:05.2: reg 18: [io 0xef00-0xef07]
pci 0000:00:05.2: reg 1c: [io 0xee00-0xee03]
pci 0000:00:05.2: reg 20: [io 0xed00-0xed0f]
pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
pci 0000:00:06.1: reg 10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:06.1: PME# supported from D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:08.0: reg 14: [io 0xec00-0xec07]
pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:07.0: [1131:7133] type 0 class 0x000480
pci 0000:01:07.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:01:07.0: supports D1 D2
pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x9ff00000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [10de:065b] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xdc00-0xdc7f]
pci 0000:02:00.0: reg 30: [mem 0xfbf80000-0xfbffffff pref]
pci 0000:00:0f.0: PCI bridge to [bus 02-02]
pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 000000009fee0000 - 000000009fffffff
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x9ff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x087f]
pnp 00:02: [io 0x0290-0x0297]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfefff000-0xfefff3ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x000ce200-0x000cffff]
pnp 00:0c: [mem 0x000f0000-0x000f7fff]
pnp 00:0c: [mem 0x000f8000-0x000fbfff]
pnp 00:0c: [mem 0x000fc000-0x000fffff]
pnp 00:0c: [mem 0xfefff000-0xfefff0ff]
pnp 00:0c: [mem 0x9fee0000-0x9fefffff]
pnp 00:0c: [mem 0xffff0000-0xffffffff]
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x00100000-0x9fedffff]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0xfefff000-0xfeffffff]
pnp 00:0c: [mem 0xfff80000-0xfff80fff]
pnp 00:0c: [mem 0xfff90000-0xfffbffff]
pnp 00:0c: [mem 0xfffed000-0xfffeffff]
system 00:0c: [mem 0x000ce200-0x000cffff] has been reserved
system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: [mem 0xfefff000-0xfefff0ff] has been reserved
system 00:0c: [mem 0x9fee0000-0x9fefffff] could not be reserved
system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x00100000-0x9fedffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0c: [mem 0xfefff000-0xfeffffff] could not be reserved
system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0f.0: PCI bridge to [bus 02-02]
pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x9ff00000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x9ff00000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
pci 0000:00:05.0: Enabling HT MSI Mapping
pci 0000:00:05.1: Enabling HT MSI Mapping
pci 0000:00:05.2: Enabling HT MSI Mapping
pci 0000:00:06.0: Enabling HT MSI Mapping
pci 0000:00:06.1: Enabling HT MSI Mapping
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11192k freed
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1342865633.516:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1726
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0f.0: setting latency timer to 64
pcieport 0000:00:0f.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2012-07-21 10:13:54 UTC (1342865634)
Initializing network drop monitor service
Freeing unused kernel memory: 412k freed
Write protecting the kernel text: 2840k
Write protecting the kernel read-only data: 1088k
NX-protecting the kernel data: 3304k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udevd[52]: starting version 175
SCSI subsystem initialized
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:08.0: setting latency timer to 64
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: Fan [FAN] (on)
ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
ACPI: [Package] has zero elements (f730b7e0)
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
libata version 3.00 loaded.
Refined TSC clocksource calibration: 3013.888 MHz.
Switching to clocksource tsc
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:fd:0f:6e
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-3-686-pae ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 20
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 20
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 23
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 23
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 22
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 22
ata6: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 22
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
ata7.00: configured for UDMA/33
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100
ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
usb 2-2: new full-speed USB device number 2 using ohci_hcd
usb 2-2: New USB device found, idVendor=067b, idProduct=2303
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB-Serial Controller
usb 2-2: Manufacturer: Prolific Technology Inc.
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-4: new low-speed USB device number 3 using ohci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-4: New USB device found, idVendor=046d, idProduct=c01d
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB-PS/2 Optical Mouse
usb 2-4: Manufacturer: Logitech
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
ata8: port disabled--ignoring
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input1
generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
fstype: sending ioctl 540f to a partition!
PM: Starting manual resume from disk
PM: Hibernation image partition 254:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[435]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input4
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
ACPI: resource nForce2_smbus [io 0x1c40-0x1c7f] conflicts with ACPI region SM00 [io 0x1c40-0x1c45]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
NV_TCO: NV TCO WatchDog Timer Driver v0.01
NV_TCO: Watchdog reboot not detected.
NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3000 MHz)
powernow-k8: 1 : pstate 1 (2300 MHz)
powernow-k8: 2 : pstate 2 (1800 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
Linux media interface: v0.10
IR NEC protocol handler initialized
Linux video capture interface: v2.00
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
saa7130/34: v4l2 driver version 0, 2, 17 loaded
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
saa7134 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
saa7133[0]: found at 0000:01:07.0, rev: 209, irq: 17, latency: 32, mmio: 0xfdeff000
saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,autodetected]
saa7133[0]: board init: gpio is 0
IR JVC protocol handler initialized
Registered IR keymap rc-asus-pc39
input: saa7134 IR (ASUSTeK P7131 Hybri as /devices/pci0000:00/0000:00:06.0/0000:01:07.0/rc/rc0/input5
rc0: saa7134 IR (ASUSTeK P7131 Hybri as /devices/pci0000:00/0000:00:06.0/0000:01:07.0/rc/rc0
IR Sony protocol handler initialized
saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
nvidia 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
input: MCE IR Keyboard/Mouse (saa7134) as /devices/virtual/input/input6
IR MCE Keyboard/mouse protocol handler initialized
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
snd_hda_intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
hda_intel: msi for device 1043:81f6 set to 0
snd_hda_intel 0000:00:06.1: setting latency timer to 64
lirc_dev: IR Remote Control driver registered, major 250
rc rc0: lirc_dev: driver ir-lirc-codec (saa7134) registered at minor = 0
IR LIRC bridge handler initialized
tuner 1-004b: Tuner -1 found with type(s) Radio TV.
tda829x 1-004b: setting tuner address to 61
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for pl2303
pl2303 2-2:1.0: pl2303 converter detected
usb 2-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
tda829x 1-004b: type set to tda8290+75a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input7
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
Adding 4194300k swap on /dev/mapper/bigbox-swappah. Priority:-1 extents:1 across:4194300k
tda1004x: timeout waiting for DSP ready
EXT4-fs (sda1): re-mounted. Opts: (null)
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
fuse init (API version 7.17)
it87: Found IT8716F chip at 0x290, revision 1
ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
forcedeth 0000:00:08.0: irq 41 for MSI/MSI-X
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
tda1004x: found firmware revision 20 -- ok
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 17 registered as card -1
eth0: no IPv6 routers present
lvcreate: sending ioctl 1261 to a partition!
EXT4-fs (dm-4): orphan cleanup on readonly fs
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 1441966
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 525449
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 1441943
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 525020
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 1441951
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 526123
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 1441947
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 526168
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 1442013
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 539880
EXT4-fs (dm-4): 10 orphan inodes deleted
EXT4-fs (dm-4): recovery complete
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
lvcreate: sending ioctl 1261 to a partition!
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)